Spool Valve Hydraulic Motors

Spool valve motors transmit high torque at low speeds by means of a cylindrical valve and a gerotor or Geroler®, which are special drive members that turn the output shaft.

Applications: Machine tools, drilling and tapping machines, seed drills, augers, conveyors, textile machinery, sweepers, fans, scissors lifts and commercial mowers.

Specifications: Speed Range: Up to 1000 RPM. Torque Range: Up to 565 Nm (5000 lb-in). Options: Variety of optional shafts, ports, mountings and displacements. Output Shafts: Straight with Woodruff key, splined, tapered or straight with cross holes.

Disc Valve Hydraulic Motors

Disc valve hydraulic motors operate similarly to spool valve motors but use Gerolers® exclusively. They are designed with a flat, disc-shaped valving system and are reversible. These products are effective at very low speeds.

Applications: Conveyors, augers, screws, spreaders, mixers, grinders, winches, reel drives, sweepers and various propel applications.

Specifications: Speed Range: Up to 900 RPM. Torque Range: Up to 3390 Nm (30,000 lb-in). Options: Wide variety of optional shafts, mountings, ports, displacements, speed sensors- and bolt-on valves. 2-Speed Models: Available in Series 2000 and 10000.

Valve-In-Star™ (VIS) Hydraulic Motors

High performance VIS 30, 40 and 45 motors deliver high torque in a compact envelope, plus superior volumetric and mechanical efficiencies. Patented design reduces leakage by incorporating a flexible, pressure-balanced wear plate. VIS design helps extend the performance life of the motor.

Applications: Skid steer loaders, crop sprayers, grape harvesters, specialty harvesting equipment, construction equipment, compactors, augers, forestry equipment, road rollers and trenchers.

Specifications: Speed Range: Up to 500 RPM. Torque Range: Up to 5085 Nm (45,000 lb-in).

ME Series Hydraulic Motors

Double swash plate, opposedpiston, low-speed, high-torque hydraulic motors. These motors operate smoothly at low speed within the maximum ratings and cause very little torque ripple. Available with a brake, counterbalance valve, two speeds and geared motor options.

Applications: Swing drives, winches and propel drives for large vehicles.

Specifications: Pressure Range: 248 and 276 bar (3600 and 4000 psi). Torque Range: Up to 16136 Nm (11,900 lb-ft).

Series 5

The Series 5 steering control unit (SCU) features a compact design and installation flexibility. These units offer a variety of choices in mounting, ports (now available with Snap-To-Connect, STC® direct ports), port locations, configurations and integral valve functionality. Balanced architecture provides smooth, best-in-class steering feel and crisp centering. Series 5 SCUs are affordably designed for low flow, low pressure applications and are more efficient than competitive units.

Applications: Lawn, garden and turf equipment, lift trucks, golf course maintenance equipment and compact utility tractors.

Specifications: Displacement: 31.5-120 cm3/r (1.92-7.33 in3/rev). Flow: 11-19 l/min (3-5 gpm). Pressure (max.): 140 bar (2030 psi).

Series 10

The new Series 10 SCU facilitates hydraulic fluid flow like no other unit on the market. Offering an unprecedented, continuous pressure rating of 275 bar (4000 psi). Its robust design, balanced architecture and many options, offer increased performance during transient pressure and high standby conditions. Several optional features and technologies, such as STC® direct ports, Q-Amp, cylinder damping and the new VersaSteer™ (dual “metered” and “quick” steering modes), result in an improved steering experience and reduce system cost.

Applications: Heavy-duty equipment, such as construction and agricultural vehicles.

Specifications: Displacement: 60-739 cm3/r (3.6-45.1 in3/rev). Flow: 3.8-45 or 8.0-76 (Q-Amp) l/min (1-16 or 2-20 gpm). Pressure (max.): 275 bar (4000 psi).

Series 20

The Series 20 SCU continues Eaton’s tradition of innovative design and high quality that began with the first Char-Lynn fluid linked power system. The balanced and robust design provides, stability and positive low effort steering feel to ensure excellent vehicle control. Available with optional STC® direct ports, Q-Amp, Wide Angle, cylinder damping and the new VersaSteer™ (dual“metered” and “quick” steering modes) which reduce system cost, improve productivity and increase operator satisfaction.

Applications: Articulated vehicles, such as wheel loaders, forestry equipment and dump trucks.

Specifications: Displacement: 60-985 cm3/r (3.6-60 in3/rev). Flow: 38-125 l/min (10-33 gpm). Pressure (max.): 241 bar (3500 psi).

Series 25

The Series 25 SCU includes several optional features and technologies, such as STC direct ports, Q-Amp and Wide Angle, that make it even more responsive, reliable and cost effective. Symmetrical valving provides uniform steering and a high capacity gerotor assembly provides a lot of capacity in a compact package. The Series 25 offers a higher flow rating and lower pressure drop than any competitive unit on the market.

Applications: Large articulated and fixed frame vehicles.

Specifications: Displacement: 490-1230 cm3/r (30-75 in3/rev). Flow: 95-151 l/min (25-40 gpm). Pressure (max.): 241 bar (3500 psi).

Series 40

The Series 40 SCU is designed for the highest flow, highest pressure applications, and is the most capable steering control unit on the market. This SCU features patented Eaton technology and has design attributes that result in responsive, smooth, stable and cost effective steering.

Applications: Large articulated vehicles such as, loaders, mining trucks, graders, scrapers, haulers and transporters.

Specifications: Displacement: 1230-3030 cm3/r (75-185 in3/rev). Flow: 151-227 l/min (40-60 gpm). Pressure (max.): 241 bar (3500 psi).

Steering Accessories

Eaton offers a complete line of steering columns and wheels to fit every need. Both feature the latest technology that result in superior erformance in even the most rugged applications.

The f Series fixed column family features a robust design, increased durability, rugged construction and hundreds of versions. The high performance and ergonomic i Series tilt and telescoping column family provides infinite adjustment and large telescoping travel distance for reduced driver fatigue.

Eaton now also offers a complete line of stylish yet robust Eaton Char-Lynn steering wheels.

In addition to the broad standard offering, we will customize to fit your specific application.

VMQ

The Vickers VMQ is the world leader in pressure capacity and noise levels and is available in a complete range of singles, doubles, triples and thru-drives. The unique wafer plate design of the VMQ allows for the increase in viscosity and pressure rise during cold start-up — something that competitors do not have. The Vickers VMQ 32nd design isthe highest pressure, lowest noise fixed vane pump available.

Applications: Marine and railway winches, oil field and drilling equipment, earthmoving and construction equipment, highpressure plastic injection molding machines, large press machines, trash compactors and large balers.

Specifications: Displacements: From 10 cc/rev (.60 in3/r) to 463 cc/rev (28.2 in3/rev) using triple pump combined flow. Pressure Range: Up to 4250 psi (293 bar). Speed Range: Up to 3000 r/min.

V/VQ Vane Pump

The V/VQ series vane pumps are the pioneers of cartridge-design vane pumps. They are well known for long operating life, outstanding efficiency, flexible configuration and easy serviceability. The quiet 12-vane V series pumps are the most popular medium pressure industrial fixed pumps in the world. For mobile equipment, the unique flex plate in the VQ pumps adds superior start-up capability in cold and harsh outdoor work environment. That’s why the VQ series pumps are widely adopted by world’s leading mobile OEMs.

Specifications: Max. continuous pressure up to 3000psi/210 bar. Displacement up to 11.8in3/ rev[194cc/rev]. Speed up to 2700rpm. Available in single, double, triple and thru-drive pump frames.

V10/V20

Time proven dependable, durable, quiet and most economical vane pumps.They are the premium fixed pump choice as the main system pumps for small industrial and mobile equipment or as pilot and auxiliary pumps for complex systems.They are also the standard steering pump technology for heavy-duty trucks and interstate buses. Optional integrated flow control valves simplify system design and installation.

Specifications: Max. continuous pressure up to 2500psi/175 bar. Displacement: Up to 2.59in3/ rev[42cc/rev]. Speed Range: Up to 4800rpm.

VVS/VVP

The VVS and VVP series variable vane pumps are cost effective solutions for low to medium pressure industrial applications where a flexible flow and low noise is required. A full range of control options are available from basic pressure compensator to load sensing, torque limiting control. The pumps are designed for long operating life thanks to hydrodynamic lubrication of bearings. You can find them in many high-end sophisticated machine tools.

Specifications: Max. continuous pressure up to 2300psi/160 bar. Displacement up to 6.1in3/ rev[100cc/rev]. Speed up to 1800rpm.

420

Eaton's new mobile equipment piston pump design sets the standard for high power in a compact envelope. This cradle swashplate style pump provides key performance enhancements over older designed pumps. The mounting, porting and thru-drive options allow extended flexibility
for modern mobile equipment applications.

Applications: Refuse Trucks, Utility Boom Trucks, Ag. Tractors, Skid Steer Loaders, Rough Terrain Fork Lifts, Wheel Loaders, Backhoe Loaders,
Construction Equipment, Earth Moving Equipment, Hydraulic Generator Drives, Hydraulic Fan Drive Systems.

Specifications: Displacements: 41cc, 49cc, 62cc & 80cc. Speed Range: Up to 2650 rpm. Pressure rating 280 bar continuous, 320 bar intermittent.

PVB

One of the most widely known industrial open circuit piston pumps on the market. The large number of control options provides for extreme flexibility in applications.

Applications: Factory automation, hydraulic power supplies, and small mobile equipment auxiliary circuits.

Specifications: Displacements: From 10cc to 94cc, 1800 RPM maximum and up to 210 bar.

PVQ

Based on the industrial versions of PVB and PVE Open Circuit Piston Pumps, the Q Series greatly improves operating noise levels. The design of the PVQ reduces sound levels by 4 dBA. The large number of control options provides for extreme flexibility in applications.

Applications: Factory automation, hydraulic power supplies, food processing machines, and machine tools.

Specifications: Displacements range from 10cc to 45cc, 1800 RPM maximum and up to 210 bar (3000 psi).

PVE

The PVE Open Circuit Piston Pump was designed with mobile hydraulics in mind. The robust design often exceeds the life requirements of the machines it is applied in.

Applications: Farm tractors, agriculture equipment, utility vehicles, construction equipment, and many other mobile applications.

Specifications: Displacements range from 25cc to 45cc, 3000 RPM maximum and up to 210 bar (3000 psi).

PVH

The H Series Open Circuit Axial Piston Pumps provide power for a wide range of mobile and industrial applications meeting customer requirements for performance. These cradle type swashplate pumps have rapid response to hydraulic circuit dynamics.

Applications: Mobile: wheel loaders, graders, scrapers, utility vehicles, dozers, forestry harvesting machines, and rock drills.

Industrial: metal-forming equipment, hydraulic power supplies, press, factory automation, and machine tools.

Specifications: Displacements from 57cc to 141cc, speeds up to 2600 RPM and pressures up to 250 bar (3600 psi) continuous.

PVM

The M Series Piston Pump family was designed as a quiet, medium pressure pump for industrial applications. The cradle swashplate design pumps were created with low noise in mind. Design features reduce both the structure-borne and fluid-borne noise levels to market leading levels.

Applications: Metal forming, tube bending, machine tools, precision sawing, factory automation, press, and hydraulic power supplies.

Specifications: Full 280 bar (4000 psi) continuous, 320 bar (4600 psi) intermittent pressure. Electric motor speeds. Mineraloil- based and fire-resistant fluid compatibility. Displacements from 18cc to 141cc. Pressure compensation and pressure/flow compensation controls.

PVXS

The Hydrokraft™ PVXS design pumps are high pressure (350 bar) axial piston pumps designed for industrial markets. The PVXS pumps are widely
used where their range of specialized pump controls can optimize circuits.

Applications: Metal forming, tube bending, press, marine and off-shore winches, chemical mixing grinding/shredding, and hydraulic power supplies.

Specifications: Full 350 bar (5000 psi) continuous pressure. Electric motor speeds. Mineral oil based and fire resistant fluid compatibility. Displacements from 66cc (4.0 in3) to 250cc (15/2 in3).

PVWS

The Hydrokraft™ PVWS design pumps are high pressure (350 bar) axial piston pumps. These products are designed for industrial markets and have a perpendicular style control mechanism allowing tandem pump combinations with short lengths. These high displacement pumps have a very long list of optimized control options that allow operation in many unique customer applications.

Applications: Metal forming, tube bending, press, marine and off-shore winches, chemical mixing grinding/shredding, and hydraulic power supplies.

Specifications: Full 350 bar (5000 psi) continuous pressure. Electric motor speeds. Mineral oil based and fire resistant fluid compatibility. Displacements from 250cc (15.2 in3) to 750cc (45.7 in3).

Heavy Duty Series 2 Axial Piston Pumps

Series 2 pump meets the market’s demands for compact, quiet hydrostatic power. The powerdense, axial-piston design and wide range of controls are suited for mobile and industrial applications. Series 2 offers durability and high power density, plus a variety of options and controls.

Applications: Agricultural, crop sprayers, lift trucks, timber harvesters, road rollers, wheel loaders, road building, construction equipment and industrial applications.

Specifications: 430 bar (6250 psi), 5 displacements from 54 to 105cc. Speeds up to 4510 RPM. Integral charge pumps. A, B, B-B, C auxiliary through-drives.

Bent Axis Motors - Fixed & Variable

Eaton’s family of Bent Axis Motors offer greater flexibility than ever before. Capable of operation in open or closed circuits, these motors are well suited to a wide range of stationary and mobile applications. Configurations include fixed and variable displacements, flange or gearbox mounts. Can be tailored with controls, ports, and valving to optimize productivity, efficiency, and cost effectiveness.

Applications: Earthmoving machines and construction equipment, agricultural and forestry vehicles, marine and off-shore equipment, industrial conveying, mixing and other stationary in-plant plant uses.

Specifications: Eleven fixed displacement options from 11cc (.66 cir) to 225cc (13.73 cir). Five variable displacement options from 55cc (3.34 cir) to 225cc (13.73 cir). Rated pressure 350 bar (5100 psi), peak pressure to 450 bar (6500 psi). Speeds up to 5590 RPM.

Heavy Duty Series 1 Axial Piston Pumps

Series 1 offers durability and high power density, plus a variety of options and controls.

Applications: Agricultural, transit mixer drum drives, industrial applications, lift trucks, timber harvesters, road rollers, wheel loaders and construction equipment.

Specifications: Six displacements from 54 cc/r (3.34 cir) to 125 cc/r (7.62 cir). Speeds up to 4510 RPM.

Heavy Duty Axial Piston Motors - Fixed & Variable

Eaton offers a complete line of piston motors for all types of hydrostatic drives. Product range includes fixed and variable displacement, axial and bent axis designs. Complete families of control, shaft, valve block, mounting and porting options offer unparalleled flexibility to systems designers.

Applications: Agricultural, construction, lawn and turf, utility equipment.

Specifications: Six displacements from 54 cc/r (3.34 cir) to 125 cc/r (7.62 cir). Pressure up to 430 bar (6250 psi). Speeds up to 4510 RPM.

Medium Duty Axial Piston Manual Pumps

Different valve plate options provide a range of control efforts that can closely match your application needs. A square control shaft reduces control linkage wear. A flexible pump design, with single, tandem, and back-to-back versions available. When your application calls for a robust, manually controlled pump this product is the choice.

Applications: Agricultural, construction, lawn and turf, utility equipment. S

pecifications: Model 70360 – Displacement (Max.): 20,3 cc (1.24 cid). Speed (Max.): 3600 RPM. Continuous Rated Pressure: 210 bar (3000 psi).Intermittent Pressure (Max.): 345 bar (5000 psi). Model 70160 Displacement (Max.): 40,6 cc (2.48 cid). Speed (Max.): 3600 RPM. Continuous Rated Pressure: 210 bar (3000 psi). Intermittent Pressure (Max.): 345 bar (5000 psi).

Medium Duty Axial Piston Servo Pumps

For ease of operation or electronic pump controls this product is the choice. A versatile, pump with many features and options. For example, five different charge pump displacements are available. A flexible design configured to meet your needs with many features and options.

Applications: Agricultural, construction, lawn and turf, utility equipment.

Specifications: Displacement (Max.): 40,6 cc (2.48 cid). Speed (Max.): 3600 RPM. Continuous Rated Pressure: 210 bar (3000 psi). Intermittent Pressure (Max.): 379 bar (5500 psi).

Medium Duty Axial Piston Motors – Fixed & Variable

Match these motors up with the appropriate pump for a robust hydrostatic transmission. They offer opposite, same and rear port configurations with many optional spline and keyed shafts. Available with shuttle valve, back pressure valve for improved loop cooling and flushing. Also offer speed sensors and a through-shaft option for brake mounts. Variable motors are available with manual, hydraulic destroke or servo control.

Applications: Agricultural, construction, lawn and turf, utility equipment.

Specifications: Displacement Range: 1.50, 2.01, 2.48, 3.02 cu. In. Speed (Max.): 3600 RPM. Continuous Rated Pressure: 210 bar (3000 psi). Intermittent Pressure (Max.): 370 bar (5400 psi).

Light Duty Transaxles

Eaton manufactures Models 751, 771, 778 and 851 transaxles with integral ball piston pumps, motors and axle with planetary gears. This design provides a strong and durable compact drive package. Several gear reduction ratios are available.

Applications: Lawn tractors, utility vehicles and ZTR mowers.

Specifications: Output Speeds (Max.): Model 751--110 RPM (@ 3600 RPM Input), Model 771- -153 RPM (@ 3600 RPM Input), Model 778--121 RPM (@ 3600 RPM Input), Model 851 -- 112 RPM (@ 3200 RPM Input).

Light Duty Transmissions

These transmissions combine a variable displacement, radialball- piston, and hydraulic pump with a fixed displacement, radial-ball-piston, and hydraulic motor in one housing.

Applications: Lawn tractors (8-20 HP) and seeders, commercial mowers, golf course maintenance equipment, concrete saws, utility trucks, garden tractors and ZTR (zero-turn radius) mowers.

Specifications: Models 6 & 7 – Speeds (Max.) Input 3600 RPM, Output 2150 RPM. Torque Output: Continuous, 14 Nm (120 lb-in), Intermittent, 20 Nm (180 lb-in), Peak, 27 Nm (240 lb-in). Model 11– Speeds (Max.): Input 3600 RPM, Output 0 - 1950 RPM. Torque Output: Continuous, 41 Nm (360 lb-in), Intermittent, 61 Nm (540 lb-in), Peak, 81 Nm (720 lb-in).

Gear Pumps

SAE AA, A, and B mount aluminum pumps in displacements ranging from .2cid [33cc] to 3.4cid [55cc]. A wide range of mount, shaft, and porting options meeting SAE, Metric, and NPTF standards are available.

Applications: Garden and utility tractors, backhoes, combines, road graders, hay swathers and industrial power units.

Specifications: Speed Range (Max.): 2250 to 4000 RPM. Rated Pressures: 207 – 241 bar (3000 to 3500 psi).

Screw-in Cartridge Valves

Screw-in cartridge valves provide many advantages over traditional hydraulic valves. While offering the same control functions as traditional hydraulic valves, screw-in cartridge valves are compact, reliable, and economical. Combining multiple valves in a common manifold offers the user substantial cost-saving advantages that cannot be achieved with traditional valving. Vickers ToughCoil™ have been designed to provide industry leading enviromental protection and solenoid performance in a compact package. The best in class, onepiece, shell encapsulated, design meets the most stringent environmental requirements for mobile and industrial applications.

Specifications: Pressure: Up to 6000 psi. Flow: Up to 150 USgpm.

Slip-in Cartridge Valves

Typically associated with relatively high flows, i.e. 40 USgpm or higher, slip-in cartridge valves are targeted at more efficient, faster and more compact hydraulic systems. Eaton cartridge valve system technology meets the changing needs of new generations of hydraulically operated machinery and equipment. Today’s machines need controls that are exceptionally cost effective and energy efficient. Vickers cartridge valves fulfill these needs. Applications: Compatible with computer or programmable controls via electrically modulated pressure and flow control models. Simple on-off solenoid pilot controls, as well as air operated types, are also available.

Specifications: Rated pressure 5000 psi (350 bar) ; rated flow up to 1300 USgpm (5000 l/min)./td>

Directional Control Valves

DG valves mount on industry standard surfaces and provide 3 or 4-way control in a broad range of applications, industrial and mobile. Their primary function is to direct fluid flow to a cylinder or to control the direction of rotation of a hydraulic motor. These valves can be actuated by solenoid, hydraulic or pneumatic pilot, lever, or mechanically. A full range of complementary pressure, flow and check valve functions are available in the Eaton SystemStak™ family of sandwich mounted valves. Eaton DG valves are available in 10 different frame sizes.

Specifications: Rated pressure up to 5000 psi ( 350bar); rated flow up to 290 USgpm (1100 l/min)./td>

Flow Controls – Adjustable

Temperature and pressurecompensated flow controls allow precise volumetric control. Suitable for pressures up to 3600 psi, flow controls are available with (bypass type) or without (restrictor type) integral relief valves. Adjustable flow control valves are suited for applications requiring flow regulation without pressure compensation.

Specifications: rated pressure up to 3600 psi (250 bar); rated flow up to 28 USgpm (106 lpm).

Flow Divider Valves

Priority-type, pressure-compensated flow divider valves are made in adjustable and non-adjustable models up to 379 L/Min. (100 GPM).

Pressure Control Valves

Pressure control valves performance pressure relieving, reducing, sequencing, and unloading control. Both subplate and in-line mounting types are available. Both subplate and in-line mounting types are available with various control types including remote, multiple pressure and venting.

Specifications: Rated pressure up to 5000 psi (350 bar); rated flow up to 180 USgpm (680 lpm).

Proportional Control Valves

Proportional control valves include directional, flow, and pressure controls driven by separate amplifier/control cards, or on-board amplifier. Directional control valves have three performance levels, standard, high (main stage feedback), and servo performance (two stage feedback).

Specifications: Rated pressure up to 5000 psi (350 bar); rated flow up to 190 USgpm (680 lpm)./td>

Self-Leveling Valves

These linear flow divider valves for automatic leveling of bucket or attachments are used on skid steer or agricultural loaders. Available in single direction (raise only) or new dual direction.

Specifications: Rated Flow: 20gpm (75 lpm). Rated Pressure: 3500psi (240 bar).

Servovalves

These two-stage, four-way, flapper nozzle valves provide system closed loop control with exact positional accuracy, repeatable velocity and predictable force or torque regulation.

Specifications: rated pressure up to 5000 psi (350 bar); rated flow up to 40 USgpm (151 lpm).

SystemStak™ Modular Valves

These compact hydraulic systems feature modular valves that are “sandwich” mounted between a directional control valve and a standard mounting surface. All circuit flow paths are contained within the control valve and modules. These valves provide a compact hydraulic circuit at a reduced cost, eliminating interconnecting piping. Each valve “stack” can be configured to provide the specific system functions.

Specifications: Rated pressure up to 4500 psi (315 bar); rated flow up to 90 USgpm (340 lpm).

HRCs – Hydraulic Remote Controls

Low effort, precise control means less operator fatigue and more productivity. Excellent pressure metering capability allows precise control and less wear-and-tear. Freedom of system design means single-station control of widely placed directional valves can be readily achieved. In a vehicle, an HRC is easily mountable in the cab or elsewhere because it is compact and eliminates the cumbersome mechanical linkage found in many applications. HRCs are now available with STC Direct Port Options for fast, reliable, one-hand connections.

Applications: Wheel loaders, skid steer loaders, backhoeloaders, excavators, cranes, lift trucks and forestry machines.

Specifications: Rated Flow: 5.3 gpm (20 lpm). Rated Pressure: 1450psi (100 bar).

CMX Sectional Valves

CMX sectional valves provide hydraulic or electrical actuation, allowing generous flexibility for location and installation in a vehicle. Phasing between meter-out and meter-in can be pre-selected to easily match valve metering to type of load and cylinder area ratio and permit lowering without using pump flow. Pressure compensated meter-in provides good metering when two or more functions are operated simultaneously and permits priority to be accomplished in pilot circuit.

Applications: Forestry equipment, wheel loaders, rough terrain lift trucks and boom man lifts.

Specifications: Rated Flow: 26 ans 42gpm (98 & 159 lpm). Rated Pressure: Up to 5075psi (350 bar) depending on port configuration.

Monoblocks™ – 5 & 15 GPM

Excellent monoblock design results in fewer leakage paths. Hardened and plated spools provide superior impact and corrosion resistance. Two– point mounting prevents spool binding.

Applications: Trenchers, sweepers/scrubbers, stand-up lift trucks, aerial work platforms, small ag loaders, garden tractors, golf course maintenance equipment and highway mowers.

Specifications: Rated Flow: 5 and 15gpm (19 & 56 lpm). Rated Pressure: 2500-3000psi (172-207 bar).v

A broad range of single and double acting cylinders is available for industrial and mobile markets, with standard and custom design and manufacturing capability to meet every need.

Applications: Applications include plastic blow and injection molding equipment, machine tools, steel mills, tube benders, packaging and material handling equipment, food processing, off-shore, planters and pickers.

Specifications: Rated Pressures to 4,600 psi (320 bar) Standard, to 10 ksi Custom. Available Sizes: 3/4 to 60 inch (20 to 1500 mm) bore sizes. 5/16 to 50 inch (8 to 1270 mm) rod sizes. Strokes to 65 feet (20 meters).

High Pressure Spiral Hose and Fittings

Eaton offers spiral hose and fittings exhibiting Best-In-Class longevity and breadth of product line designed to perform in a wide variety of hydraulic
applications.

When coupled with our Global Spiral fittings, featuring micro-alloy steel and no-braze technology, our assemblies provide superior lifecycle performance.

Applications: hydrostatic drives, oil rigs, construction equipment, mobile & industrial systems. Specifications:Available in a broad range of cover materials and sizes that meet a variety of applications. Our hoses meet or exceed EN/DIN, Mil-spec and SAE specifications.

Medium Pressure

Braided Hose and Fittings Medium pressure braided hose and fittings represent the largest market and widest variety of hydraulic applications. Our
unsurpassed line of products ensures you can always find the right hose for your application.

Applications: General hydraulic systems, mobile equipment, industrial equipment.

Specifications: A range of hose styles and sizes that meet a variety of EN/DIN, Mil-spec and SAE specifications. Certifications include ABS, DNV, MSHA, DOT/FMVSS and many more.

Thermoplastic

Choose from a full line of hydraulic thermoplastic hose. The versatility of thermoplastics allows for non-conductive hose to be used on utility truck
applications.

Applications: Forklifts and agricultural equipment.

Specifications: Hoses with ID’s that range from 1/8" thru 1". Pressures: Up to 10000 psi.

MatchMate Plus™

Aeroquip’s MatchMate Plus “3 Minute Crimp Hose Assembly System” is tailor made for high-speed assembly processes. Hoses are color-coded for the
ease of identification. An error-free selection exists for fittings – the number of rings on the fitting sockets matches-up with the number of rings on the
hose laylines.

Applications: General hydraulic systems, mobile equipment, industrial equipment.

Specifications: 6 hose styles; 1/4" thru 2" size range that meet a variety of EN/DIN and SAE specifications.

PTFE

A broad range of hose and matched fittings are available for use in a wide variety of applications. PTFE fits the bill when high temperature meets the entire spectrum of fluid pressures.

Applications: Ranging from self-contained breathing apparatus to high temperature engine hose.

Specifications: Meet SAE 100R14A and B specifications. Pressures: Up to 5000 psi.

A/C & Transportation Products

Engineered components and assemblies for a wide range of fluid power systems. Hose materials range from high temperature AQP® to PTFE to nylon veneer products for A/C applications.

Applications: Hose and fittings for air conditioning and refrigeration, fuel and lube oil, engine and transmissions, oil cooler lines, airbrake, and power steering applications.

Specifications: A/C = multirefrigerant; Transportation = truck hose for every application.

Performance Products

High performing hose, fittings and adapters for discriminating motorsport enthusiasts and professionals around the world. Aeroquip Performance Products...There is a difference! Specifications: Fuel, oil, coolant, gauge, and brake lines.

Marine/Military

Wide variety of hose, fittings and adapters that meet many marine, military and government specifications. Aeroquip Marine/ Military...there is no equal!

Specifications: Lube, fuel, water, and air. A detailed catalog specifically listing the Mil spec part numbers is available for the customer’s use.

Fluid Transfer

From low pressure air and water to hazardous chemical transfer, Boston offers a variety of products to meet the exact needs of an application. These products range from 1/4" to 8" ID in size and many are available in either spiral or braided construction.

Applications: Air, Water, Cleaning, Material Handling, Food, Chemical, Petroleum, Steam hoses and Specialty Service

Low Pressure Hose

Choose from a full range of low pressure hose with push-on connections, including hi-temperature AQP, abrasion resistant covers for demanding service life and color-covered hose for installation identification. A low temperature MIL-DTL-13444 hose is included in the product offering.

Applications: Ranging from low pressure machine tools, fuel, oil, air and water. The size range is 1/4"ID through 3/4" ID. (not recommended for hydraulic impulse applications).

Adapters and Tube Fittings

Offering a variety of standard and non-standard configurations to meet every need. Available in steel, brass and stainless steel. Tube fittings are designed for both inch and metric tubing, including the Eaton Walterscheid tube fitting systems. Numerous end-styles are available — ISO, BSP, DIN and NPT to name a few popular standards.

Applications: In-plant Industrial Equipment, Mobile On/Off Highway Equipment, and General Hydraulic System use.

Specifications: SAE J512, J513, J518, J1926, J1453 / DIN 2353 / ISO 8434, 6162 and others. Sizes: 1/8th “to 2” & 4mm to 42mm. Additional sizes available upon request.

Couplings

A broad range of products encompassing the simple (air couplings) to the complex (hydraulic applications) to the most complex (SCBA).

Applications: Hydraulic attachments, SCBA.

Specifications: Full range of pneumatic, hydraulic and fluid transfer. Couplings meet a variety of SAE and ISO specifications.

Swivels

Offering compact and robust designs while offering a wide variety of end configurations with the flexibility to perform in many dynamic hydraulic applications.

Applications: Hose reels, scissor lifts.

Specifications: Can be used in a full range of pneumatic, hydraulic and fluid transfer applications.

STC®: Snap-To-Connect

The broadest range of threadless connectors in the industry! Eaton patented technology has been extremely successful in various rigorous mobile applications.

Applications: Truck/bus platforms and construction/ agricultural equipment.

Specifications: Connections are offered in 3/8" up to 1". Pressures: Up to 345 bar (5000 psi).

Tools & Crimp Machines

A wide variety of crimp machines are available for every requirement (low and high volume hose assembly) for both distributors and OEMs. Select from a complete line of popular crimp machines.

Specifications: Ability to crimp hose of all sizes (1/8" up to 2").

Accessories

A full range of clamps, protective sleeves, hose cleaning services and hose routing aids. Specifications: Able to be used with all sizes of hose and metal products.